November 14, 2026Import markets & compliance3 min read

Yiwu Eyewear Wholesale: Floor 1 Fit

Aeonix Trade

Published by Aeonix Trade.

Yiwu Eyewear Wholesale: Floor 1 Fit

Start on floor 1 of Yiwu District 3. Yiwugo's product table, as of 10 November 2026, prints Glasses there beside pens, ink and paper. The same page gives the building 460,000 square metres, over 6,000 booths of 14 square metres on floors 1 to 3, and more than 600 booths of 80 to 100 square metres on floors 4 and 5, with the manufacturer outlet on floor 4. Buy finished frames you can measure on floor 1. Move to a lens-cutting workshop only when the booth cannot show who edges the lens or who holds the mould.

Garments are a different building: the Huangyuan clothing market. The floor map for the whole complex is the district and floor guide.

Send the temple length, lens width and booth number with an eyewear sourcing RFQ if you want those three checks done before the cartons are booked.

What to write on the approved pair

Three measurement fields for a Yiwu glasses sample: temple length, lens width, and bridge and hinge.
Write the millimetres on the sample. The bulk pair has to meet those numbers, not a size sticker that changed.

Measure temple length and lens width in millimetres and put them next to the size the booth printed. Open the hinge. A gap or a temple that springs past the point you accepted goes in the note. Copy any lens mark exactly, and write "none" if the lens is blank. Photograph the front, both temples and the hinge open and closed. Left and right stay in the same carton unless the packing list says otherwise. Pairs per carton go on that list. The look against this note, before the cartons leave, is the market-floor check.

Frame spec sheet. Fill the sample column at the booth and the bulk column before loading.
FieldApproved sampleBulk pair
Booth and floorDistrict 3, floor 1, plus the booth numberSame booth, or a written change
Temple lengthmm you measuredSame mm
Lens widthmm you measuredSame mm
Lens markExact text, or noneSame text
HingeOpens and sits as acceptedSame
Pairs per cartonAgreed countCount on the packing list
Keep this sheet with the photos. A sticker that disagrees with the millimetres is a different article.

Finished frames or a cluster visit?

Split between finished frames on District 3 floor 1 and a cluster visit for lens cutting or a mould.
Stay on floor 1 when you can measure a finished frame. A mould or lens-edging question is a different visit.

Finished frames you can measure stay on District 3. If the order depends on who plates the metal or who edges the lens, that is a workshop visit, and you take that city's own operator page with you. The booth visit has then done its job: it showed you the finished pair and the gap.

A brand on the temple that you do not have a right to buy is a reason to leave the booth.

How the code is built

The World Customs Organization, as of 10 November 2026, describes the Harmonized System as an international product nomenclature: more than 5,000 commodity groups, each identified by a six-digit code. National tariffs add digits after those six. Use that structure when you ask a broker for the line. The six digits are the shared start, not a guess written on a booth card.

When the sheet is full, send it with the eyewear sourcing RFQ.

Source notes

You’re leaving Aeonix Trade

This link opens a third-party website in a new tab. Check the destination before continuing; its content and privacy practices are outside our control.

Submit sourcing request

Can't find what you need?

Start with a product or image link, an approximate quantity and destination. Other details can follow.