AEONIX_TRADE / SYSTEM_REPORT
FCC-AUTHORIZATION-FOR-ELECTRONICS-MADE-IN-CHINA
NOVEMBER 12, 2026/Import markets & compliance

FCC Rules for Electronics Made in China

Aeonix Trade

Published by Aeonix Trade.

FCC Rules for Electronics Made in China

A China-made radio is authorized in one of two ways under the Commission's rules, as of 10 November 2026. 47 CFR 2.906 is Supplier's Declaration of Conformity: the responsible party makes the measurements, and a sample need not be sent to the Commission unless section 2.945 specifically requests one. 47 CFR 2.907 is certification: an authorization approved by the Commission or issued by a Telecommunication Certification Body, based on test data, and it attaches only to units identical to the tested sample, apart from changes the Commission authorizes. Section 2.907(c) adds a hard switch: equipment that would otherwise use a declaration, if produced by an entity on the Covered List, must go through certification. A logo on a Huaqiangbei quotation does not choose the path.

Two-column diagram of FCC Supplier's Declaration of Conformity under 47 CFR 2.906 and certification under 47 CFR 2.907.
Use 2.906 or 2.907 as written. The Covered List route is 2.907(c), as of 10 November 2026.

Send the radio module and who you think the grantee is so the file can name the procedure before the balance is paid.

Match the paper to the build

The Federal Register notice of 2 November 2017 records the Commission's replacement of the older Declaration of Conformity and verification procedures with Supplier's Declaration of Conformity. It describes certification as the more stringent process, including use of accredited laboratories, and it says a party may choose certification even where a declaration is available. That notice is history of the rule. The procedure for this speaker is the current section, not a 2017 product chart.

What to demand for each path. Rules as of 10 November 2026.
PathThe paper has to show
SDoC, 2.906The responsible party, the measurements, and a test facility that is not owned or controlled by a prohibited entity under 2.902. A sample goes to the Commission only if 2.945 asks.
Certification, 2.907A grant from the Commission or a TCB, and this lot identical to the tested sample, or a change the Commission has authorized.
Covered List producerCertification, even if the equipment would otherwise have used a declaration. Read 2.907(c) before you accept an SDoC.
If the supplier cannot name the section, the PDF with an FCC logo is not an authorization.
Callout that an SDoC sample is not sent to the Commission unless 47 CFR 2.945 asks for one.
47 CFR 2.906, as of 10 November 2026.

Keep the other files in their own folders

Battery shipping and the Shenzhen booth are on the Shenzhen electronics note. A CE declaration for a lamp that also ships to the Union is a different regime, on CE marking for products from China. Who files the US entry is on importing from China to the United States. A packing inspection does not issue either authorization.

What buyers ask

Is SDoC the old Declaration of Conformity?

The 2017 notice says the Commission replaced Declaration of Conformity and verification with Supplier's Declaration of Conformity. Read 2.906 for the procedure in force.

Does every radio need a grant?

No. Certification is 2.907. A declaration is 2.906. The notice says a party may choose certification where a declaration is allowed, and 2.907(c) requires certification for a Covered List producer in the cases it states.

Put the equipment and the destination on the RFQ if you want the path named before production.

Sources

You’re leaving Aeonix Trade

This link opens a third-party website in a new tab. Check the destination before continuing; its content and privacy practices are outside our control.

Submit sourcing request

Can't find what you need?

Start with a product or image link, an approximate quantity and destination. Other details can follow.