November 14, 2026Import markets & compliance4 min read
Yiwu PPE: Floor 2 and the EU File
Published by Aeonix Trade.

Look for work gloves on floor 2 of Yiwu District 4. Yiwugo's paragraph and table, as of 10 November 2026, put gloves there with daily necessities and hats. A vest sold from a numbered booth on that floor stays with that booth number. In the European Union, Regulation (EU) 2016/425 has applied since 21 April 2018. Your Europe's CE-marking page, as of 10 November 2026, says the mark is only for products covered by harmonised EU rules that specifically require it, and that the mark must not be used when no such rule exists. Personal protective equipment is on that page's non-exhaustive list.
Tools and locks are a different aisle: hardware and tools. Garments as a market are Huangyuan.
Send the glove size, the markings you copied and the booth number with a PPE sourcing RFQ.
Match the file to the PPE risk category
Start with the intended protection, not the product name: “work gloves” does not establish a risk category. Under Regulation (EU) 2016/425, Annex I and Article 19, Category I covers only the listed minimal risks and uses internal production control (module A). For series-produced PPE, Category II requires EU type-examination (B) followed by internal production control (C); Category III requires B plus supervised random product checks (C2) or production-process quality assurance (D). Every category needs an EU declaration of conformity. For II and III, that declaration does not replace the required notified-body assessment.
Copy every marking on the pair into your note, including a mark you do not recognise. Write the size you are holding and the shell and cuff in ordinary words. Keep the answers below with the sample. Do not approve a protective claim until the category and its supporting evidence match that model.
| Ask | Why | File it as |
|---|---|---|
| Which law | CE is only where a harmonised rule requires it | Name of the regulation |
| Which risks and category | Annex I classifies the intended protection, not the booth label | Intended use, risks and Category I, II or III |
| Whose name is on the paper | The manufacturer indicates conformity by affixing the mark | Legal name |
| Is it this SKU | A paper for a different product does not cover the pair in your hand | Manufacturer model identifier, linked to the booth SKU |
| Which conformity route and certificate | I: A. II: B + C. III: B + C2 or D for series production | EU declaration; for II/III, EU type-examination certificate, validity and covered model |
| Which notified body | II/III need the B assessor; III also needs C2/D surveillance evidence | Body name and number, certificate reference; III: C2/D route and surveillance body |
Where the gloves actually are
Count gloves in pairs unless the packing list names another unit, and write the unit. Size goes on the bag and the carton. A vest from a numbered booth gets its own line. The floor check before those cartons leave is the market-floor check.
Send the category, supporting documents and size run with the PPE sourcing RFQ.
Source notes
- Regulation (EU) 2016/425, consolidated 29 May 2026, checked 14 November 2026. Annex I, Article 19 and Annex IX: risk categories, assessment routes and declaration details.
- European Commission, PPE and its regulation guidelines, fifth edition, October 2025, checked 14 November 2026. Check the notified body and its PPE scope through the Commission’s linked NANDO directory; an unrelated voluntary certificate is not a substitute.
- Yiwugo, District 4, as of 10 November 2026. Gloves on floor 2.
- European Commission, PPE harmonised standards, as of 10 November 2026. Regulation (EU) 2016/425, applicable 21 April 2018. Summary list does not itself create legal effects.
- Your Europe, CE marking, as of 10 November 2026. Mark only where a harmonised rule requires it. PPE is on the non-exhaustive list.
Submit sourcing request
Can't find what you need?
Start with a product or image link, an approximate quantity and destination. Other details can follow.